Rechargeable Li-Po Battery 3.7v 600mAh (303450)

Description

Rechargeable Li-Po Battery 3.7v 600mAh (303450)
Dimension: 34mm x 52mm. Rated voltage 3.7V.
Thickness: 3mm
Wires length about 4cm.

Recommended to use with Lily58 Pro Tented Case or Corne Tented Case, using two sided glue tape underneath the base plate on elevated side.
On Low Profile Cases with MX style switches the standoffs should be 9mm long instead of standard 6mm. In this case the battery should be between the PCB and base plate. This means the final height of the keyboard will be 3mm higher. Check the dimensions and make sure it fits into your keyboard before ordering. On Low Profile Cases with choc switches the standoffs should be 8mm long instead of standard 5mm.

⚠️Won’t fit into: Lily58 Pro High Profile Case, Mid Profile Case.

Sold by one unit. Photos are just for the reference and demonstration purpose.
To solder the wires directly to your wireless controller you’ll probably need to add some length to the wires to reach the controller, depending where you’ll fit the battery.