Description
Rechargeable Li-Po Battery (601235) with 300mAh capacity.
Dimension: 6mm x 12mm x 35mm. Rated voltage 3.7V.
Wires length about 3cm.
⚠️Since this battery is 6mm thick, solder the controller’s sockets higher from PCB surface, to make more room under the controller, this way this battery will fit better under it.
Recommended for keyboards without oled socket, otherwise it might bump into controller’s type-c connector.
📣 How much does it take to charge the 300mah Rechargeable Li-Po Battery with Nice!Nano ?
It takes about 3 hours to fully charge the 300mah Rechargeable Li-Po Battery.
Battery charging time ( hours ) = Battery capacity ( in Ah ) / Current supplied ( in A )
Li-Po Battery capacity: 300 mAh = 0.3 Ah
Current Supplied by nice!nano = 100 mA = 0.1 A
300 mAh Battery charging time about ~ 3 Hours = 0.3 Ah / 0.1 A
📣 How much the 300mah Rechargeable Li-Po Battery using with Nice!Nano will last without having to recharge ?
Depends on many factors and variables, but on average, in my experience, master side lasts about 16-17 days using it around 8h/day without having to recharge (slave half lasts about twice more time than master). Here is the ZMK Power Profiler. You can simulate and have an idea of the battery autonomy.
After 15 minutes of inactivity the keyboard goes into deep sleep mode, saving efficiently battery charge. The power draw on nice!nano v2 during deep sleep is around 20uA, which is about 1mAh every 2 days. The battery on slave side will last more time than on the master side, as it consumes less energy.
For more info check Nice!Nano FAQ page.
Sold by one unit. Photos are just for the reference and demonstration purpose.
Please note: the split keyboards on kriscables.com don’t support battery with JST PH connector, therefore use this listing to solder the wires directly to your wireless controller.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.