Description
This listing is exclusively for 2x Corne Choc PCB
Parts you will need for the DIY build:
- 2x Acrylic/FR4 Base Plates + 2x FR4 Switch Plates + 2x Oled Acrylic Covers
- 42x SMD Diodes
- 42x Choc Hotswap Sockets
- 2x TRRS jacks
- 2x Reset Switch
- (42 per-key + 12 underglow) SK6812 MINI RGB LEDs
- Mounting hardware
- 2x Controllers (Pro Micro or Nice!Nano)
- 42x Choc Switches
- 42x Choc Keycaps
- TRRS cable
- USB cable
Parts that are optional, but recommended for the build:
- Mill Max Low Profile Sockets (to make the controller hotswap)
- Mill Max Socket Pins
- OLED Display Module 0.91″ 128×32
- OLED Hotswap Socket
- 2x Rechargeable Li-Po Battery (in case you plan to make it wireless with Nice!Nano)
Additional notes:
- PCB Supports only Kailh Choc Low Profile switches and Choc hotswap sockets (not possible to solder the switches directly into PCB)
- Split keyboard with 3 rows, 6 columns and 3 thumbs per half
- Supports VIA if you want to change your layout without the need to know how to code and flashing each time the controllers (requires to flash on first time the VIA keymap)
- You will need to know some basic programming if you’ll want to use some advanced features adapt the keymap’s layout to your needs
- You will need some basic knowledge of soldering + soldering equipment
- PCBs are reversible
Keymaps:
Guides:
- How to compile ZMK Firmware and flash Nice!Nano Controller
- How to compile QMK firmware and flash Pro Micro Controller
- Corne Choc Build Guide
Build photos are for demonstration purpose ONLY, please read the full kit description.
Corne was created by Kosuke Adachi (a.k.a. foostan).
