Corne Cherry V3 PCB

Description

This listing is exclusively for 2x Corne Cherry V3 PCBs.

Parts you will need for the DIY build:

• 2x Acrylic/FR4 Base Plates + 2x Acrylic/FR4 Switch Plates + 2x Oled Acrylic Covers
• 42x SMD Diodes
• 42x MX Hotswap Sockets
• 2x TRRS jacks
• 2x Reset Switch
• 42x SK6812 MINI-E RGB LEDs
• 12x WS2812B RGB LEDs
• Mounting hardware
• 2x Controllers (Pro Micro or Nice!Nano)
• 42x MX Switches
• 42x MX Keycaps
• TRRS cable
• USB cable

Parts that are optional, but recommended for the build:

• Mill Max Low Profile Sockets (to make the controller hotswap)
• Mill Max Socket Pins
• OLED Display Module 0.91″ 128×32
• OLED Hotswap Socket
• 2x Rechargeable Li-Po Battery (in case you plan to make it wireless with Nice!Nano)

Additional notes:

• PCB Supports only MX style switches and MX hotswap sockets (not possible to solder the switches directly into PCB)
• Split keyboard with 3 rows, 6 columns and 3 thumbs per half
• Supports VIA if you want to change your layout without the need to know how to code and flashing each time the controllers (requires to flash on first time the VIA keymap)
• You will need to know some basic programming if you’ll want to use some advanced features adapt the keymap’s layout to your needs
• You will need some basic knowledge of soldering + soldering equipment
• PCBs are not reversible

Keymaps:

• Pro Micro QMK default keymap
• Nice!Nano ZMK default Keymap

Guides:

• How to compile ZMK Firmware and flash Nice!Nano Controller
• How to compile QMK firmware and flash Pro Micro Controller
• Corne Build Guide

Build photos are for demonstration purpose ONLY, please read the full kit description.

Corne was created by Kosuke Adachi (a.k.a. foostan).